Next, fill out the additional ordering information for the drawers. Your options are Drawer box, or False Attachment Kit. In the example cabinet below we will be replacing all the drawer boxes for items ( a, c, d, e ) so we entered Drawer box on the form. The width and height sizes of the drawer boxes will be based off the drawer front sizes you have ordered. The length of our standard drawer boxes is 20” long.

For the item listed in location (b) we wrote False Kit.  The drawer in this location has a sink above it.  There is no drawer box so the drawer front will need to be attached to the cabinet.  Attaching a drawer front with the counter top installed can be a problem.  We have developed an attaching kit to simplify this job. See following page. 

False Drawer Attaching Kit

We attach blocks to the back of the drawer front 1/2” in from the sides at each end, and then attach another off-set block on top.  All that is required to install the drawer front is turning the locking blocks inwards, Place the drawer front in the opening, then reach under the inside and turn the locking blocks outwards, this locks the drawer in place. Tip: one advantage with this system is if you ever need to clean the space between the drawer front and the cabinet you can easily remove it.